Rear Bumper Fascia Energy Absorber Replacement

Fig 1: Rear Bumper Fascia Energy Absorber Component Location With Torque Specification

Courtesy of GENERAL MOTORS COMPANY

TIGHTENING TORQUE SPECIFICATION

Callout	Component Name
Preliminary Procedures Rear Bumper Fascia Replacement Reposition the wiring harness.
1	Rear Bumper Fascia Energy Absorber Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Bumper Fascia Energy Absorber Procedure Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Rear Bumper Fascia Energy Absorber Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Rear Bumper Fascia Energy Absorber
Procedure
Transfer components as necessary.