LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Shaft Seal Installation

Manual Shift Shaft Seal Installation

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4378861Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Manual Shift Shaft Seal
CAUTION:

When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.

NOTE:

Install a NEW seal. Do NOT reuse the old seal.


Special Tool 
DT-49101  Seal Installer
Equivalent regional tools: Special Tools .
scientia non olet · About LEMON Manuals