LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation >> Park Pawl Actuator Guide Installation

Park Pawl Actuator Guide Installation

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4378858Courtesy of GENERAL MOTORS COMPANY
Park Pawl Actuator Guide Installation

Callout Component Name
1 Park Pawl Actuator Guide
NOTE:

Install park pawl actuator guide in proper orientation to allow pin to be fully installed. Failure to install properly can cause damage to guide or allow vehicle to not fully engage in park.

2 Park Pawl Actuator Guide Pin

Procedure

  1. Install a NEW park pawl actuator guide pin.
  2. Install the park pawl actuator guide pin till bottoms out.