Automatic Transmission Input Shaft Speed Sensor Reluctor Wheel, 3-5-Reverse Clutch Piston and Spring, and Seals Disassemble
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Automatic Transmission Input Shaft Speed Sensor Reluctor Wheel, 3-5-Reverse Clutch Piston And Spring And Seals Components
Automatic Transmission Input Shaft Speed Sensor Reluctor Wheel, 3-5-Reverse Clutch Piston and Spring, and Seals Disassemble
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Input Shaft Speed Sensor Reluctor Ring Retaining Ring |
| 2 | Automatic Transmission Input Shaft Speed Sensor Reluctor Wheel Special Tools DT-47694 Piston Spring Compressor Equivalent regional tools: Special Tools |
| 3 | 3-5-Reverse Clutch Piston |
| 4 | 5-7-Reverse Piston Retainer Spring |
| 5 | 3-5-Reverse Clutch Piston Dam Seal
NOTE:
Remove and DISCARD the seal. |
| 6 | 3-5-Reverse Clutch Piston Inner Seal
NOTE:
Remove and DISCARD the seal. |
| 7 | 3-5-Reverse Clutch Piston Inner Seal
NOTE:
Remove and DISCARD the seal. |