LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the transmission using a suitable jack.
  2. Remove the air cleaner bracket. Air Cleaner Bracket Replacement
  3. Remove the engine wiring harness fuse block bracket. Engine Wiring Harness Fuse Block Bracket Replacement
  4. GM4940174Courtesy of GENERAL MOTORS COMPANY

    Engine Mount Brace Bolt (1) - Remove [2x]

  5. Remove the transmission mount bracket (2) from the vehicle.
  6. Transmission Mount Transmission Side Bolt (3) - Remove and DISCARD [4x]
  7. Transmission Mount Bolt (4) - Remove [2x]
  8. Remove the transmission mount (5) from the vehicle.
scientia non olet · About LEMON Manuals