LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4675709Courtesy of GENERAL MOTORS COMPANY

    Install the transmission mount (4).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission mount bolts (1, 2, 3) and tighten to 58 N.m (43 lb ft).
  3. GM4675691Courtesy of GENERAL MOTORS COMPANY

    Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).

  4. Remove the jack from the transmission.
  5. Lower the vehicle. Lifting and Jacking the Vehicle
scientia non olet · About LEMON Manuals