LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. Remove the air cleaner assembly. Air Cleaner Assembly Replacement
  3. GM4592602Courtesy of GENERAL MOTORS COMPANY

    Disconnect the range selector lever cable terminal (3) from the transmission manual shift lever (2).

  4. Remove the bolt (1) retaining the automatic transmission range selector lever cable to the cable bracket.
  5. Remove the range selector lever cable from the transmission.
  6. Remove the front floor console. Front Floor Console Replacement
  7. GM4197275Courtesy of GENERAL MOTORS COMPANY

    Disconnect the automatic transmission range selector lever cable terminal (2) from the shift lever pin.

  8. Release the automatic transmission range selector lever cable retainer (1) and remove the automatic transmission range selector lever cable from the transmission control lever base.
  9. GM4200030Courtesy of GENERAL MOTORS COMPANY

    Move the floor carpet and insulation in order to gain access to the automatic transmission range selector lever cable grommet (2).

  10. Remove the automatic transmission range selector lever cable grommet nuts (1) and the automatic transmission range selector lever cable grommet from the cowl panel.
  11. Remove the automatic transmission range selector lever cable from the vehicle.