LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Lever Replacement (LTG Engine) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. Remove the battery tray. Battery Tray Replacement
  3. Disconnect the automatic transmission range selector lever cable terminal (1) from the transmission manual shift lever pin. Automatic Transmission Range Selector Lever Cable Replacement 
  4. GM4486771Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.

    Remove the automatic transmission range selector lever nut (1).

  5. Remove the automatic transmission range selector lever (2).
scientia non olet · About LEMON Manuals