Water Pump Pulley Removal

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Water Pump Pulley Bolt [4x]
2	Water Pump Pulley Procedure Install the EN-46104 Water Pump Pulley Holding Tool onto the water pump pulley mounting holes. Remove the water pump pulley bolts. Remove the EN-46104 Water Pump Pulley Holding Tool from the water pump pulley. Special Tool EN-46104 Water Pump Pulley Holding Tool Equivalent regional tools: Special Tools

Callout

Component Name

Water Pump Pulley Bolt [4x]

Water Pump Pulley

Procedure

Install the EN-46104 Water Pump Pulley Holding Tool onto the water pump pulley mounting holes.
Remove the water pump pulley bolts.
Remove the EN-46104 Water Pump Pulley Holding Tool from the water pump pulley.

Special Tool
EN-46104 Water Pump Pulley Holding Tool
Equivalent regional tools: Special Tools