LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Piston, Connecting Rod, and Bearing Cleaning and Inspection >> Connecting Rod Cleaning Procedure

Connecting Rod Cleaning Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the connecting rods in solvent.
    2. WARNING:

    Refer to Safety Glasses Warning .

  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals