Installation Procedure
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Install the NEW O-ring (1) on the oil level indicator tube (2).
Position the oil level indicator tube (1) by sliding the tube down and in to the approximate location of the lower crankcase hole.
- Guide the lower portion of the oil level indicator tube into the lower crankcase hole and seat the oil level indicator tube in place.
- Attach wiring harness retainers as necessary.
- CAUTION:
Refer to Fastener Caution .
Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 10 N.m (89 lb in)