LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Intake Manifold Cleaning and Inspection >> Intake Manifold Cleaning Procedure

Intake Manifold Cleaning Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove any remaining gasket and/or gasket material from the following:
    • Throttle body
    • Intake manifold
  2. Clean the following intake manifold areas in solvent.
    • Intake manifold gasket sealing areas
    • Intake manifold passages
    • Brake booster hose passage
    • Evaporative emission (EVAP) solenoid passage
    • Positive crankcase ventilation (PCV) vacuum hose passages
    3. WARNING:

    Refer to Safety Glasses Warning .

  3. Dry the intake manifold and throttle body with compressed air.
scientia non olet · About LEMON Manuals