Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the engine front cover. Engine Front Cover Assemble
Oil Pump Flow Control Solenoid Valve Harness - Install - Oil Pump Flow Control Solenoid Valve Harness Replacement
Fig 1: Identifying Engine Front Cover And Bolts With Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

Use the EN-46109 Engine Front Cover Installation Guide Pins in order to install the engine front cover. Engine Front Cover Installation
Oil Pan - Install - Oil Pan Replacement (AWD)
Crankshaft Balancer - Install - Crankshaft Balancer Replacement
Courtesy of GENERAL MOTORS COMPANY

Engine Mount Bracket (3) - Install - Engine Mount Bracket Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Camshaft Cover - Right Side (2) - Install - Camshaft Cover Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Camshaft Cover - Left Side (2) - Install - Camshaft Cover Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Water Pump (1) - Install - Water Pump Replacement (3.6L LGX)
Courtesy of GENERAL MOTORS COMPANY

Water Pump Inlet Pipe (2) - Install - Water Pump Inlet Pipe Replacement (3.6L LGX)
Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement
Fill the cooling system. Cooling System Draining and Filling