LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Front Cover Removal >> Front Cover Bolt Removal

Front Cover Bolt Removal

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM3951808Courtesy of GENERAL MOTORS COMPANY
Front Cover Bolt Removal

Callout Component Name

Preliminary Procedure

  1. Remove the oil pan before the front cover removal. Oil Pan Removal 
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
1 Engine Front Cover Bolt
NOTE:

Part of engine mount on Front Wheel Drive version.
2 Engine Front Cover Bolt
NOTE:

Part of engine mount on Front Wheel Drive version.
3 Engine Front Cover Bolt [16x]
4 Engine Front Cover Bolt [2x]
scientia non olet · About LEMON Manuals