Sealant Application
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Sealant Application
| Callout |
Component Name |
| 1 |
Engine Front Cover Procedure
- Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
- Apply a 3 mm (0.118 in) bead of RTV sealant on the engine front cover as shown.
- Apply a 5 mm (0.197 in) bead of RTV sealant on the engine front cover as shown. Adhesives, Fluids, Lubricants, and Sealers
NOTE:
- No RTV sealant should be visible in the M12 bolt holes upon final assembly of front cover to engine.
- Keep the RTV bead path on the outward edge of the t-joints to ensure proper sealant coverage.
|
| 2 |
3 mm (0.118 in) Bead of RTV Sealant |
| 3 |
5 mm (0.197 in) Bead of RTV Sealant |
| 4 |
M12 Bolt Holes |