LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Front Cover Disassemble >> Crankshaft Front Oil Seal Disassemble

Crankshaft Front Oil Seal Disassemble

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4058781Courtesy of GENERAL MOTORS COMPANY
Crankshaft Front Oil Seal Disassemble

Callout Component Name
1 Crankshaft Front Oil Seal
Procedure 
Remove and DISCARD the seal.
Special Tools 
EN-45000  Seal Remover
Equivalent regional tools: Special Tools
2 Camshaft Position Actuator Control Valve Seal [2x]
Procedure 
Remove and DISCARD the seal.