LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Front Cover Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3961517Courtesy of GENERAL MOTORS COMPANY

    Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant

  2. Remove any RTV sealant (1) from the engine front cover using EN-28410  remover.
  3. Clean out debris from the bolt holes.
  4. Clean the engine front cover in solvent.
  5. WARNING:

    Refer to Safety Glasses Warning .

  6. Dry the engine front cover with compressed air.