Inspection Procedure
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Inspect the manual transmission engine flywheel for the following conditions:
- Missing and/or damaged alignment pins (1)
- Damaged threaded holes (2)
- Pitted surface (3)
- Scoring or grooves (4)
- Rust or other surface damaged (5)
- Damaged ring gear teeth (6)
- Loose or improperly positioned ring gear
The ring gear has an interference fit onto the engine flywheel and should be positioned completely against the flange of the engine flywheel (7).
- Replace the engine flywheel as necessary.