LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Block Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  2. Remove any old thread sealant, gasket material or sealant using EN - 28410  Gasket Remover.
  3. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  4. Clean all threaded and through holes with solvent.
    5. WARNING:

    Refer to Safety Glasses Warning .

  5. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals