Cylinder Head Removal - Right Side
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Cylinder Head Bolt M11 x 178 [8x] Procedure Remove and DISCARD the bolts. |
| 2 | Cylinder Head BoltM8 x 80.8 Procedure Remove and DISCARD the bolts. |
| 3 | Cylinder Head |
| 4 | Cylinder Head Gasket Procedure Remove and DISCARD the cylinder head gasket. |
| 5 | Fuel Injection Fuel Rail Noise Shield
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death. |