Crankshaft Bearing Removal
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Remove and DISCARD the crankshaft upper bearing halves from the cylinder block. Note the position of the thrust bearing (1) at the number 3 journal (2).
 Courtesy of GENERAL MOTORS COMPANY
|
Remove and DISCARD the crankshaft lower bearing halves (1) from the crankshaft bearing caps (2).