LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Crankshaft Rear Oil Seal and Housing Removal

Crankshaft Rear Oil Seal and Housing Removal

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM3952531Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Crankshaft Rear Oil Seal Housing Bolt [7x]
2 Crankshaft Rear Oil Seal Housing

Procedure

  1. Use Pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  3. Remove and DISCARD the crankshaft rear oil seal housing.
scientia non olet · About LEMON Manuals