LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Crankshaft Balancer Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Crankshaft Balancer - Install - Crankshaft Balancer Installation 
  2. Using the engine support fixture raise the engine into place.
  3. Starter - Install - Starter Replacement (3.6L LGX)
  4. Drive Belt - Install - Drive Belt Replacement 
  5. Engine Mount-Right Side - Install - Engine Mount Replacement - Right Side 
scientia non olet · About LEMON Manuals