LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Camshaft Timing Chain Components Installation >> Oil Pump Timing Chain Installation

Oil Pump Timing Chain Installation

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM3979319Courtesy of GENERAL MOTORS COMPANY
Oil Pump Timing Chain Installation

Callout Component Name
1 Oil Pump Timing Chain
NOTE:

Timing of the oil pump to the engine is not required. The colored links on the oil pump drive chain and timing mark on the oil pump drive sprocket are for production use only.

2 Crankshaft Sprocket
3 Oil Pump Sprocket
Procedure 
Use a suitable wrench to hold the sprocket to torque the bolt.
4 Oil Pump Drive Bolt
Procedure 
Install a NEW bolt. Do NOT reuse the old bolt.

Tighten in sequence

  1. First Pass: 15 N.m (11 lb ft)
  2. Final Pass: 110 degrees