Camshaft Removal - Right Side
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Camshaft Bearing Cap Bolt |
| 2 | Camshaft Bearing Cap Bolt [4x] |
| 3 | Camshaft Bearing Cap |
| 4 | Dowel Pin |
| 5 | Camshaft Bearing Cap Bolt [14x] |
| 6 | Camshaft Bearing Cap |
| 7 | Camshaft Bearing Cap |
| 8 | Camshaft Bearing Cap - Intermediate |
| 9 | Dowel Pin |
| 10 | Intake Camshaft - Right Side
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 1 (B) |
| 11 | Exhaust Camshaft - Right Side
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 1 (A) |