Camshaft Assemble
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Camshaft Assemble
| Callout |
Component Name |
| 1 |
Exhaust Camshaft - Right Side
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 1 (A)
Procedure
- Make sure the camshaft flats with laser etched markings are straight up in relation to the cylinder head and that the crankshaft is in the stage 2 position. The crankshaft key way will be at approximately the 3 o'clock position. Timing Chain Alignment Diagram
- Ensure the flat is facing upward when installed to help when installing timing chains.
|
| 2 |
Intake Camshaft - Right Side
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 1 (B)
Procedure
- Make sure the camshaft flats with laser etched markings are straight up in relation to the cylinder head and that the crankshaft is in the stage 2 position. The crankshaft key way will be at approximately the 3 o'clock position. Timing Chain Alignment Diagram
- Ensure the flat is facing upward when installed to help when installing timing chains.
|