Right Camshaft Cover
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Right Camshaft Cover
| Callout | Component Name |
|---|---|
| 1 | Spark Plug Shield Seal Procedure Install a NEW seal. Special Tools J-46103 Camshaft Actuator Valve Seal Installer Equivalent regional tools: Special Tools |
| 2 | Valve Rocker Arm Oil Control Valve |
| 3 | Valve Rocker Arm Oil Control Valve Bolt Tighten 10 N.m (89 lb in) |
| 4 | Camshaft Position Sensor [2x] |
| 5 | Camshaft Position Sensor Bolt [2x] Tighten 10 N.m (89 lb in) |
| 6 | Positive Crankcase Ventilation Valve
NOTE:
These components have tamper-proof connections and cannot be disassembled. |