LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Camshaft Carrier Cleaning and Inspection >> Inspection Procedure Left Camshaft Carrier

Inspection Procedure Left Camshaft Carrier

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left Camshaft Carrier Inspection Points
GM4077940Courtesy of GENERAL MOTORS COMPANY
  1. Inspect the camshaft carrier for the following conditions:
    • Damage to the top sealing surface (1)
    • Damage to the camshaft bearing cap bolt holes (2)
    • Damage to the camshaft carrier bolt holes (3)
    • Damage to the camshafts mounting surface areas (4)
    • Damage to the camshaft position actuator solenoid valve holes (5)
    • Damage to the camshaft bearing cap bolt holes (6)
    • Damage to the fuel pump bolt holes (7)
    • Damage to the fuel pump mounting surface and the valve lifter follower area (8)
    • Damage to the engine oil manifold check valve mounting areas (9)
    • Damage to the bottom sealing surface (10)
  2. Repair or replace the camshaft carrier as necessary.