LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Camshaft Carrier Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove any old thread sealant, gasket material or RTV sealant using EN-28410  remover.
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  3. Clean the camshaft carriers using a non corrosive solvent.
  4. Clean out debris from the bolt holes.
    5. WARNING:

    Refer to Safety Glasses Warning .

  5. Dry the camshaft carriers with compressed air.
scientia non olet · About LEMON Manuals