LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> No First and Reverse Gears

No First and Reverse Gears

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (521)
  • Inspect for stripped or sheared internal or external splines on Low and Reverse Clutch Assembly (521)
  • Inspect for broken or disengaged retainer ring
Low and Reverse Clutch (590)
  • Inspect for stripped or sheared splines on Low and Reverse Clutch Plates (596 - 597)
  • Inspect for damaged, deformed or improper surface finish on the Low and Reverse Clutch Plates (596 - 597)
  • Inspect for stripped or sheared splines on Low and Reverse Clutch Backing Plate (598)
  • Inspect for worn, damaged or debonding Low and Reverse Clutch Piston Seals (592)
  • Inspect for broken or fatigued Low and Reverse Clutch Piston Return Spring (593)
1-2-3-4-5-6 Clutch Piston (592)
  • Inspect for disengaged or broken Low and Reverse Clutch Piston Spring Retainer (594)
  • Inspect for broken or deformed Low and Reverse Clutch Piston (592)
  • Inspect for damaged or improper surface finish in the piston bore