LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Engine Controls And Fuel - 3.6L (LGX) - Diagnostic Information And Procedures (P0449-P3436) And Symptoms) >> Diagnostic Information and Procedures >> DTC P0627-P0629 or P12A6 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Fuel System Description

Circuit Description
Control The output circuit is switched to 12 V to activate the component.
Component Description
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
K111 Fuel Pump Driver Control Module The control module K111 supplies the fuel pump with a PWM signal in order to achieve the desired fuel line pressure.

When the ignition is turned On, the ECM sends a 12 V signal to the control module K111 to enable the fuel pump. If the engine is not started, the control module K111 turns the fuel pump Off after 6 s.

scientia non olet · About LEMON Manuals