LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Controls And Fuel - 3.6L (LGX) - Diagnostic Information And Procedures (P0010-P0446)) >> Diagnostic Information and Procedures >> DTC P034A or P034B >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

P034A 

Condition 1 

The difference between the memorized and actual crankshaft position was greater than 2 reluctor ring teeth during 2 autostart events in one ignition cycle.

Condition 2 

The difference between the memorized and actual crankshaft position was greater than 1 reluctor ring teeth during 4 autostart events in one ignition cycle.

P034B 

The direction of rotation of the crankshaft has changed more than 3 times within 10 s.