LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Controls And Fuel - 3.6L (LGX) - Diagnostic Information And Procedures (P0010-P0446)) >> Diagnostic Information and Procedures >> DTC P013A-P013F, P014A, P014B, P015A-P015D, or P2270-P2273 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

P013A, P013C 

MAF Sensor = Not within a calibrated range & HO2S 2 = 150 to 450 mV

P013B, P013D 

MAF Sensor = Not within a calibrated range & HO2S 2 = 350 to 650 mV

P013E, P014A 

MAF Sensor = Not within a calibrated range & HO2S 2 = Greater than 450 mV

P013F, P014B 

MAF Sensor = Not within a calibrated range & HO2S 2 = Less than 350 mV

P015A, P015B, P015C, P015D 

HO2S 1 = Not within a calibrated range - For greater than 60 s

P2270, P2272 

MAF Sensor = Not within a calibrated range & HO2S 2 = Less than 760 mV

P2271, P2273 

MAF Sensor = Not within a calibrated range & HO2S 2 = Greater than 100 mV