Engine Oil Pressure Sensor and/or Switch Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Three-Way Catalytic Converter-Bank 2 - Remove - Three-Way Catalytic Converter Replacement (Bank 1) , or Three-Way Catalytic Converter Replacement (Bank 2) |
|
| 1 | Oil Pressure Sensor Electrical Connector |
| 2 | Engine Oil Pressure Sensor and/or Switch
CAUTION:
Refer to Component Fastener Tightening Caution . Tighten 20 N.m (15 lb ft) Special Tools EN-41712 Oil Pressure Switch Socket Equivalent regional tools: Special Tools . |