Installation Procedure
- CAUTION:
Instrument Cluster (2) - Install
- Connect the electrical connector. (3)
- Instrument Cluster Bolt (1) - Install and tighten [2x] 2. 5 N. m (22 lb in)
Install the instrument panel center air outlet bezel (1).
- Instrument Panel Center Trim Plate Applique Replacement - Install
- Steering Column Upper Trim Cover Replacement - Install
- Battery Negative Cable Disconnection and Connection (3. 6L LGX) , or Battery Negative Cable Disconnection and Connection (2. 0L LTG) - Connect
- Control Module References - Programming and Setup