LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Regal GS >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System - Diagnostic Information And Procedures (B388B-P0504) And Symptoms >> Diagnostic Information and Procedures >> Automatic Light Malfunction >> Component Testing

Component Testing

Static Test

  1. Ignition ON, observe the scan tool Ambient Light Sensor parameter. The reading should be between 1.4 - 4.5 V and change with ambient light changes.
  2. Test the B10B Ambient Light/Sunload Sensor by varying the ambient light while monitoring the sensors voltage output.
  3. Verify that the voltage output is within the range of the specification.
    • If not within the specified range, replace the B10B Ambient Light/Sunload Sensor.
scientia non olet · About LEMON Manuals