LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Rear Bumper Fascia Replacement (Chevrolet)

Rear Bumper Fascia Replacement (Chevrolet)

GM2856187
Callout Component Name

Preliminary Procedures

  1. Remove the rear wheel opening molding. Refer to Rear Wheel Opening Molding Replacement .
  2. Remove the 10 rear wheel liner to fascia screws. Refer to Rear Wheelhouse Liner Replacement .
1 Rear Bumper Fascia Lower Push-In Retainer (Qty: 4)
2 Rear Bumper Fascia

Procedure

  1. Carefully push a small nylon wedge between the fascia and the rear fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the rear fascia guide.
  2. Disconnect the electrical connector.
  3. Transfer parts as needed.
scientia non olet · About LEMON Manuals