Windshield Washer Solvent Container Filler Tube Replacement

Procedure

1. Reach into the driver side of the engine compartment at the position where the windshield washer solvent container filler tube enters the windshield washer solvent container.
2. Grasp the windshield washer solvent container filler tube where the filler tube enters the windshield washer solvent container.
3. Twist the windshield washer solvent container fill tube slightly back and forth while pulling outward from the windshield washer solvent container.
4. Remove the windshield washer solvent container filler tube.
5. Inspect and replace any damaged O-ring.
6. Use full strength windshield washer fluid at the windshield washer solvent container filler tube seal upon re-assembly.