LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - On Vehicle >> Valve Stem Oil Seal and Valve Spring Replacement >> Intake Valve Stem Oil Seal Installation Cylinder 2

Intake Valve Stem Oil Seal Installation Cylinder 2

  1. Transfer the EN-6086 - 7  lever to the exhaust side of cylinder 2.
  2. Replace the EN-6086 - 11  demounting piece with the assembled EN-6086 - 200 - 1  mounting piece (1).
  3. Install the intake valve keys, intake valve spring retainers, intake valve springs and the intake valve stem oil seals of cylinder 2 as described above.
scientia non olet · About LEMON Manuals