LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. GM2399622
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

    Using a flat-bladed tool, remove the rear crankshaft oil seal (1).

scientia non olet · About LEMON Manuals