| Seized accessory drive system component |
- Inspect the accessory drive system components.
- Repair or replace all damaged components.
|
Hydraulically locked cylinder
- Coolant/antifreeze in cylinder
- Oil in cylinder
- Fuel in cylinder
|
- Inspect for broken head gasket(s).
- Inspect for cracked engine block or cylinder head.
- Inspect for a sticking fuel injector.
|
| Seized automatic transmission torque converter |
- Remove the engine assembly. The torque converter bolts are not accessible with the engine installed to the transmission.
- Rotate the crankshaft at the pulley.
|
| Seized manual transmission |
- Disengage the clutch.
- Rotate crankshaft at the pulley.
|
Material in cylinder
- Broken valve
- Piston material
- Foreign material
|
- Inspect the cylinder for damaged components and/or foreign materials.
- Repair or replace as required.
|
| Seized crankshaft or connecting rod bearing |
- Inspect the crankshaft and connecting rod bearings.
- Repair as required.
|
| Bent or broken connecting rod |
- Inspect the connecting rods.
- Repair as required.
|
| Broken crankshaft |
- Inspect the crankshaft.
- Repair as required.
|