LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Power Brake Booster Vacuum Hose Replacement (2H0) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM4082699
    NOTE:

    Access the power brake booster vacuum hose quick connect fitting through the left front wheelhouse.

    Quick Connect Fitting(1) - Disconnect

  3. Lower the vehicle.
  4. Disconnect the power brake booster vacuum sensor electrical connector.
  5. GM4082703

    Power Brake Booster Vacuum Sensor(1) - Remove

  6. GM4082708

    Quick Connect Fitting(1) - Disconnect

  7. Power Brake Booster Vacuum Hose - Remove
scientia non olet · About LEMON Manuals