LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Brake, Accelerator, and Clutch Pedal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. GM2539299

    Remove the power vacuum brake booster bolts (1).

  3. GM2539300

    Remove the brake pedal assembly upper nuts (1)

  4. GM2539301

    Remove the brake pedal assembly lower nuts (1)

  5. Remove the steering column. Refer to Steering Column Replacement (Buick, Mexico, NJ1, With BTM, With N06)Steering Column Replacement (Buick, Canada/United States, NJ1, With BTM, Without N06)Steering Column Replacement (Chevrolet, Mexico, NJ1, With BTM, With N06)Steering Column Replacement (Chevrolet, Canada/United States, NJ1, With BTM, Without N06)Steering Column Replacement (Chevrolet, Canada/United States, NJ1, Without BTM, Without N06)Steering Column Replacement (Chevrolet, Mexico, NJ1, Without BTM, Without N06)Steering Column Replacement (Mexico, N40) .
  6. GM2772439

    Remove the brake pedal release bracket bolt (1).

  7. GM2772441

    Remove the brake pedal release bracket bolts (1).

  8. GM2772527

    Remove the brake pedal release bracket (1).

  9. Remove the brake pedal position sensor. Refer to Brake Pedal Position Sensor Replacement .
  10. On manual transmission equipped vehicles, remove the clutch pedal position sensor. Refer to Clutch Pedal Position Sensor Replacement .
  11. Remove the accelerator pedal position sensor. Refer to Accelerator Pedal Position Sensor Replacement .
  12. GM2584154

    On manual transmission equipped vehicles, compress the clutch master cylinder pushrod locking tabs (1) and release the clutch pedal by lifting the pedal upward.

  13. GM2584168

    On manual transmission equipped vehicles, remove the clutch master cylinder bolts (1) and position the clutch master cylinder aside. Refer to Clutch Master Cylinder Replacement .

  14. Position aside any wiring harnesses attached to the brake pedal assembly bracket, as necessary.
  15. GM2772542

    Remove the 2 upper brake pedal assembly bolts (1).

  16. GM2844872

    Pull the brake pedal assembly away from the dash panel.

  17. From behind the brake pedal assembly, remove the brake pedal assembly bracket nut (1).
  18. GM2844873

    Remove the brake pedal assembly bracket (1).

  19. Remove the brake pedal assembly from the vehicle.
  20. Remove any necessary components from the brake pedal assembly.
scientia non olet · About LEMON Manuals