Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Remove and properly dispose of the brake fluid from the master cylinder reservoir.
- Remove the brake master cylinder. Refer to Brake Master Cylinder Replacement .
Remove and discard the brake master cylinder reservoir roll pin (1).
Remove the master cylinder reservoir (1) by carefully pulling straight upward.
- Remove the brake fluid level indicator switch, if necessary. Refer to Brake Fluid Level Indicator Switch Replacement .
Remove the brake master cylinder reservoir seals (1).
- If replacing the master cylinder reservoir, discard the reservoir seals.