LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2018 >> Encore Preferred, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Diagnostic Information and Procedures >> Brake Pedal Pushrod Inspection

Brake Pedal Pushrod Inspection

  1. GM2027696

    Disconnect the brake pedal pushrod (2) from the brake pedal.

  2. Reposition the pedal pushrod boot (1) toward the front of the vehicle to expose as much of the pedal pushrod (2) as possible.
  3. Inspect the brake pedal pushrod (2) for straightness.
  4. If the brake pedal pushrod (2) is not straight, then the pushrod requires replacement.
  5. Return the pedal pushrod boot (1) to its original position on the pedal pushrod (2).
  6. Connect the brake pedal pushrod (2) to the brake pedal.
scientia non olet · About LEMON Manuals