Rear Bumper Fascia Energy Absorber Replacement

Callout	Component Name
Preliminary Procedures Rear Bumper Fascia Replacement Reposition the wiring harness.
1	Rear Bumper Fascia Energy Absorber Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Bumper Fascia Energy Absorber Procedure Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Rear Bumper Fascia Energy Absorber Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Rear Bumper Fascia Energy Absorber
Procedure
Transfer components as necessary.