|
Preliminary Procedure
- Front Compartment Front Sight Shield Replacement
.
- Front Wheelhouse Liner Replacement - Right Side
.
- Front Wheelhouse Liner Replacement - Left Side
- Front Wheel Opening Molding Replacement
.
- Underbody Front Air Deflector Replacement
.
|
| 1 |
Front Bumper Fascia Upper Bolt (Qty: 6)
Tighten
2.5 N.m (22 lb in) |
| 2 |
Front Bumper Fascia Retainer (Qty: 3) |
| 3 |
Front Bumper Fascia to Fender Bolt (Qty: 2)
Tighten
2.5 N.m (22 lb in) |
| 4 |
Front Bumper Fascia Procedure
- Carefully push a small nylon wedge between the fascia and the front fascia guide.Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the front fascia guide.
- Disconnect the electrical connectors.
- Disconnect the headlamp washer pump hose.
- Transfer components as necessary.
|