Sunroof Window Motor Replacement

Fig 1: Sunroof Window Motor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Headlining Trim Panel. Refer to Headlining Trim Panel Replacement
1	Sunroof Actuator Motor Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector. With a turning motion, pull downward on the sunroof window motor. Disengage the motor from the drive cables. Install the sunroof window motor to the frame with a turning motion, pushing upward. This will engage the motor into the drive cables. Tighten 4 N.m (35 lb in)
2	Sunroof Window Motor Procedure Refer to Sunroof Window Motor Initialization Verify the sunroof window motor operation.

Callout

Component Name

Preliminary Procedure
Remove Headlining Trim Panel. Refer to Headlining Trim Panel Replacement

Sunroof Actuator Motor Bolt (Qty: 3)

CAUTION:

Procedure

Disconnect the electrical connector.
With a turning motion, pull downward on the sunroof window motor. Disengage the motor from the drive cables.
Install the sunroof window motor to the frame with a turning motion, pushing upward. This will engage the motor into the drive cables.

Tighten
4 N.m (35 lb in)

Sunroof Window Motor

Procedure