Removal Procedure
Courtesy of GENERAL MOTORS COMPANY
- Relieve the fuel pressure. Refer to the Fuel Pressure Relief .
- Remove the J 34730-1A
gauge from the CH-37287-1A
adapter.
- Disconnect the quick connect coupling of the CH-37287-1A
adapter from the fuel feed hose and from the fuel feed pipe on the fuel pump. Use a shop towel in order to catch any remaining fuel that may leak. Metal Collar Quick Connect Fitting Service
- Connect the quick-connect fitting of the fuel feed hose to the fuel feed pipe of the fuel pump.
- Turn ON the ignition in order to pressurize the fuel system.
- Turn OFF the ignition.
- Check for any fuel leaks.
- Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (LTG)Intake Manifold Cover Replacement (LCV)
.