Removal Procedure

Relieve the fuel system pressure. Refer to Fuel Pressure Relief
Disconnect Fuel Feed Pipe. Refer to Fuel Feed Pipe Replacement (Engine LTG) Fuel Feed Pipe Replacement (Engine LCV)
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle

Fig 1: Fuel Pipe Shield

Courtesy of GENERAL MOTORS COMPANY

Fig 2: Fuel Feed Front Pipe And Retainers

Courtesy of GENERAL MOTORS COMPANY

Fig 3: Fuel Pressure Sensor Electrical Connector, Fuel Feed Front Pipe And Retainers

Courtesy of GENERAL MOTORS COMPANY

Disconnect the fuel pressure sensor electrical connector. (1)
Disconnect the fuel feed front pipe (2) and remove from retainers (3). Refer to Plastic Collar Quick Connect Fitting Service
If replacing the fuel feed pipe with a new one, remove the fuel pressure sensor. Refer to Fuel Pressure Sensor Replacement - Fuel Feed Pipe